1. 8 port poe with 8X100M poe ports + 1GE / 2 gigabit fiber ports
2. Comply to IEEE802.3, IEEE802.3u, IEEE802.3af, IEEE802.3at standards
3. 10/100, 10/100/1000M self-sensing RJ45 port, support power supply fuction
4. All ports support auto-flips (Auto MDI/MDIX)
5. Each POE port can provide power up to 15.4W (af) or 30W (at)
6. Supply power for powered devices compatible with IEEE802.3af/at
7. Support IEEE802.3x full duplex flow control and duplex backpressure flow control;
8. 8.8G backplane bandwidth, 2.75M forwarding memory;
9. 4K Mac address table
10. Its 2KV network port surge protection can adapt to harsh outdoor environment
11. Under the temperature of -20~65 ‘C, working at a full load 240W
12. The 2 gigabit SFP fiber ports are capable of high bandwidth and long distance transmission.
1. 8*10/100M RJ45 port+2*10/100M RJ45 port Unmanaged PoE Switch,1-8 ports compatible with IEEE 802.3af/at ;
2. PoE ports compatible with AF/AT intelligent recognition,Standard power is 15.4W/port,Maximum power: 30W/port;
3. PoE default: 1, 2(+)/3, 6(-) , alternative: 4, 5(+)/7, 8(-);
4. Port 1-8 support 250meters PoE transmission at 10Mbps
External power adapter 110W;
5. With VLAN function
1. 16*10/100M RJ45 port+2*10/100/1000M RJ45 port unmanaged PoE switch,1-16 ports support IEEE 802.3af/at
2. PoE port support AF/AT intelligent recognition,Standard power is 15.4W/port,Maximum power:30W/port;total power is 200W
3. With long distance switch, port 9-16 support 250M long distance transmit
4. PoE default 1,2(+)/3,6(-) ,alternative4,5(+)/7,8(-)
5. Built-in power adapter
6. Wth VLAN function
1. 16*10/100/1000M RJ45 ports+2*1000M SFP fiber port Unanaged PoE Switch,1-16 ports support IEEE 802.3af/at PoE;
2. PoE port support AF/ATintelligent recognition,Standard power is 12.5W/port, Maximum power:30W/port,only support 1,2(+)/3,6(-);
3. Standard 1U rack, built-in power adapter 200W;
4. Not include fiber module, can be equipped with SFP module
1. 18 Port POE with 16X100M POE PORTS+2GE/2 GIGABIT FIBER PORTS
2. Compliend to IEEE802.3af/at, 10Based-T, 100Based-T, 1000Based-T
3. Web management function based on web
4. Provide POE management, VLAN, Link aggregation, Qos, MAC address binding & other intelligent management function.
> Two-layer PoE Ethernet switch
> MAC auto study and aging, MAC address list capacity is 1K
> Conform IEEE802.3, IEEE802.3u and IEEE802.3X standards
> Default Mode: The device works as a general switch and all ports support 10/100Mbps auto-negotiation.
> Extend Mode: VLAN isolation is enabled. Ports 1-4 will be isolated respectively (10Mbps auto-negotiation), but they can communicate with the Uplink port. Besides, the transmission distance of power and network data is up to 250m.
1. 24*10/100M RJ45 port+2*10/100/1000M RJ45 port unmanaged PoE switch,1-24 ports support IEEE 802.3af/at
2. PoE port support AF/AT intelligent recognition,Standard power is 15.4W/port,Maximum power:30W/port;total power is 250W
3. With long distance switch, port 17-24 support 250M long distance transmit
4. PoE default 1,2(+)/3,6(-) ,alternative4,5(+)/7,8(-)
5. Built-in power adapter ,with mounting kits (hanger ear )
6. Wth VLAN function
Network Ports: 5
Switching Capacity: 1Gbps
High Priority Ports: Port 1
Working Mode: Extend On:250m,10M,CAT 5e, Extend Off:100m
Power Supply: 51V DC, 1.25A
Power Consumption: ≤63W
Surge Protection: 4KV
Working Temperature: 0℃-40℃
Weight: 0.299kg
Dimension: 132 mm* 93.3mm * 27.6mm
A POE switch is a network switch that has Power over Ethernet injection built-in. Simply connect other network devices to the switch as normal, and the switch will detect whether they are POE-compatible and enable power automatically. Cisco, Netgear, Hikvision, Dahua, Jovision, Tenda, D-Link, TP-Link, ONV, 5 Port POE Switch, 8 Port POE Switch, 16 Port POE Switch, 24 Port POE Switch, 28Port, 48 Port Poe Switch.
The purpose of the POE switch is to extract power from a single network cable and distribute it to each device. It takes electrical energy in one wire and turns it into data, voice, video, or other applications that use Ethernet cables for transmission. The POE switch converts power as needed on the fly so you don’t need a power cord at every port. A PoE switch has two parts: an input side where the electricity comes in and an output side where devices connect via Ethernet cables. So if your router is near your printer but not near a wall outlet, this can be problematic because you have to buy more Ethernet cables to hook up both devices. With a Power over Ethernet (PoE) Switch you just need one cable between them.
TRIMATRIK MULTIMEDIA is the Leading POE Switch Supplier in Bangladesh. We provide the Best quality switch with One Year Warranty.
POE Switches are used to power video surveillance and access control devices without the need for a separate power supply. They can be very useful in areas where electricity is not readily available, or when it is not practical to run cable from an outlet. This blog post will explore how POE switches work and what you should consider before buying one.
First we’ll go over some of the basics about these switches: like how they differ from regular Ethernet switches if they support PoE+ or just PoE, and why you might want to use them with IP cameras in particular. We’ll also discuss different types of POEs so that you can decide which type best suits your needs depending on the number of ports required.
Power over Ethernet (POE) is a technology that has been used in the industry for many years. The benefits of POE are endless, including: -Increased efficiency -Reduced installation time -Improved reliability -Ability to power devices remotely and eliminate the need for AC adapters or batteries. In this blog post we will discuss how POE switches work and their use within networks.
Cisco PoE switch is a type of network switch that provides power over Ethernet. This allows you to connect devices such as IP cameras, wireless access points, and VoIP phones without the need for an additional electrical power source. Cisco POE switches also provide more ports than your typical unmanaged or managed switch so you can connect more devices in one location.
Dahua POE Network Switches are a great way to connect IP Cameras to your network. They allow for more than one camera connection per switch, and they offer PoE (Power over Ethernet) connections. The switches come in 16 port and 24 port models so you can have up to 128 cameras connected with the 16 port model or 240 cameras using the 24 port model!
Dahua is a leading manufacturer of security solutions including IP Cameras, Access Control Systems, Surveillance Systems, Wireless Solutions and Video Management Systems. Dahua products are used by more than 1 million customers worldwide who demand reliability and quality from their surveillance systems. You can find out more about these Dahua POE Network Switches on our website
The Dahua POE Network Switch for IP Cameras is a perfect solution for anyone that wants to protect their property with IP cameras. This switch can power up to eight of the latest generation POE compatible Dahua HD cams and it’s easy to use. All you need to do is connect your camera cables, plug in the power supply and turn on the switch. The only thing left is deciding where you want your new security system installed!
Hikvision POE Network Switch is a great addition to any home or business network. This switch allows you to connect and power your Hikvision cameras remotely when you need it. You can also use the switch in conjunction with the PoE injector which will allow you to supply power over ethernet for both your camera and your Hikvision POE Network Switch.
Connecting this switch to a router will allow all of the devices on that connection, including wireless devices, share bandwidth without interruption from other networks using the same internet source. The best part about this device is its ease of configuration and price point!
The Hikvision POE Network Switch is an advanced network switch that can be used to provide power over Ethernet (PoE) and to simplify your networking. With the Hikvision PoE Network Switch, you don’t need a separate power supply for each device in your office or home. The switch provides up to 30 watts of power per port, which is enough for most devices such as IP cameras and wireless access points. Here we discuss, details about the Hikvision PoE Network Switch so you can decide if it’s right for your needs!
TRIMATRIK MULTIMEDIA | ZKTECO Bangladesh | Hikvision Bangladesh, Ahuja PA System Bangladesh, Dahua, TOA PA System & pabx Trusted Supplier in BD, IP Camera in BD
House#01 (Ground Floor), Road#20/B,Sector#04, Uttara, Dhaka-1230
© Trimatrik Multimedia. All Rights Reserved. Develop by Trimatrik Multimedia
