No products in the cart.
Fiber Optic Cable Price List:
|1.||Fiber Optic 4 Core Cable||22.00|
|2.||Fiber Optic 6 Core Cable||32.00|
|3.||Fiber Optic 12 Core Cable||42.00|
|4.||Fiber Optic 24 Core Cable||–|
An optical fiber or optical fibre is a flexible, transparent fiber made by drawing glass (silica) or plastic to a diameter slightly thicker than that of a human hair. Optical fibers are used most often as a means to transmit light between the two ends of the fiber and find wide usage in fiber-optic communications, where they permit transmission over longer distances and at higher bandwidths (data rates) than wire cables. Fibers are used instead of metal wires because signals travel along them with lesser amounts of loss; in addition, fibers are also immune to electromagnetic interference, a problem from which metal wires suffer excessively. Fibers are also used for illumination, and are wrapped in bundles so that they may be used to carry images, thus allowing viewing in confined spaces, as in the case of a fiberscope. Specially designed fibers are also used for a variety of other applications, some of them being fiber optic sensors and fiber lasers.
Optical fibers typically include a transparent core surrounded by a transparent cladding material with a lower index of refraction. Light is kept in the core by the phenomenon of total internal reflection which causes the fiber to act as a waveguide. Fibers that support many propagation paths or transverse modes are called multi-mode fibers (MMF), while those that support a single mode are called single-mode fibers (SMF). Multi-mode fibers generally have a wider core diameter and are used for short-distance communication links and for applications where high power must be transmitted. Single-mode fibers are used for most communication links longer than 1,000 meters (3,300 ft).
Being able to join optical fibers with low loss is important in fiber optic communication. This is more complex than joining electrical wire or cable and involves careful cleaving of the fibers, precise alignment of the fiber cores, and the coupling of these aligned cores. For applications that demand a permanent connection a fusion splice is common. In this technique, an electric arc is used to melt the ends of the fibers together. Another common technique is a mechanical splice, where the ends of the fibers are held in contact by mechanical force. Temporary or semi-permanent connections are made by means of specialized optical fiber connectors.
The field of applied science and engineering concerned with the design and application of optical fibers is known as fiber optics. The term was coined by Narinder Singh Kapany who is widely acknowledged as the father of fiber-optics.
Optic Fiber Cable Bangladesh
- CCTV Camera:Avtech, Campro, Dahua, Hikvision, Jovision
- IP Camera:Avtech, Campro, Dahua, Hikvision, Jovision
- DVR & NVR:Avtech, Campro, Jovision, Hikvision, Dahua
- Access Control & Time Attendance:ZKTeco, Hundure, Anviz, Soyal
- PABX & Intercom
- Archway Gate: MCD, JKDM, Garrett, ZKT
- Metal Detector: Super Scanner, Garrett
- Desktop PC
- Computer Service & Maintenance
- Computer Home Service
- Corporate IT Support
- Printer Toner & Cartridge
- PA system & Conference System:Ahuja, TOA
- Networking & Equipment
- Fiber Optic Cable, Media Converter & Patch Cord
- Router & Radio Link Device
- Server With Configure
- Power Solution
- Cable: BRB, Paradise
- Mikrotik & Cisco & EPon
- ISP Setup